Dinstar UC2000-VG - Management Parameter

UC2000-VE/F/G GSM/CDMA/WCDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Co., Ltd.
106
You can restore this configuration in case the unit loses it for any reason or to clone a unit with
the configuration of another unit. The configuration backup configurations are in txt format.
Please note that you can use a backup file from an older firmware version and use it in a unit
with a more recent firmware version. However, a backup file from a newer firmware version
than the one actually in the unit cannot be used for a restore operation on the unit.
4.12.4 Management Parameter
Parameters
Description
NTP Parameter
The Network Time Protocol (NTP) is a protocol and software
implementation for synchronizing the clocks of computer systems
over packet-switched, variable-latency data networks.
User need to fill the NTP Server Address and select Time Zone
Web Port
Default is 80
Telnet Port
Default is 23
4.12.5 Remote Server