Dinstar UC2000-VG - SIP Trunk Configuration

UC2000-VE/F/G GSM/CDMA/WCDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Co., Ltd.
62
Response Code switch
This part specifies response codes of SIP between gateway and SIP server. Refer to
table SIP Response, the SIP server possibly need some specific SIP response from the
gateway. Example, SIP server need SIP response 180 Ringing instead of 183 Ringing,
the configuration should be as below:
4.9.2 SIP Trunk Configuration
Table 4-11-1 Description of IP Trunk
Parameters
Description
SIP Trunk
Add remote IP of Softswitch, SIP server which will send call traffics to
gateway.
Index
It uniquely identifies a trunk. Its value is assigned globally, ranging
from 0 to 31.
Description
It describes the trunk for the ease of identification. Its value is
character string
IP
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the IP address of the peer equipment.
Port
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the SIP port number of the peer equipment