54
© 2008 Directed Electronics. All rights reserved.
➤ Bitwriter®
The Bitwriter® has the ability to fine tune certain features of the system.
These features and the adjustments that may be programmed are described in
the table that follows.
Note: Feature programming for Responder LC remote controls with a display
screen are available when using the Bitwriter, however these features do not
apply to this system.
Feature Default
setting
Optional settings
Aux/ trunk icon type Trunk Window, sunroof, audio, lights, left slider
dr, right slider dr, rear hatch.
Aux 1 timed output 30 seconds 1-90 seconds
Aux 2 timed output 30 seconds 1-90 seconds
Aux 3 timed output 30 seconds 1-90 seconds
Diesel start timer 15 seconds 1-90 seconds
Timer mode run time 12 minutes 1-16 minutes
Timer mode starts 6 starts
1/2/3/4/6/8/10/12/14/16/
1820/22/24 (Starts)
Timer mode intervals 3 hours
1/2/3/4/6/8/10/12/14/16/
18/20/22/24 (Hours)
Smart start low temp 0 (F)
OFF/-20/-10/0/10/20/30/40/50
/60/70 (F)
Smart start high temp 100 (F)
OFF/40/50/60/70/80/90/100/
110/120/130 (F)
Smart start low battery 10.5 volts
OFF/12.5/12/11.5/11/10.5/10/
9.5/9 volts
Tach mode starter
release
10 (normal)
0/1/2/3/4/5/6/7/8/9/10/11/1
2/13/14/15/16/17/18/19/20
Virtual tach fine tune Not initialized 0 - 1 second in 50mS increments
To Next Page
Loading...
Need help?
General
