Directed 933.TL16

5
933.TL16 1.03.198.9 2019 Toyota RAV4
©2023 Directed. All rights
Pre-installation and application warnings
START HERE
This section highlights important information for this specific firmware and will assist in pricing accordingly, as
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
compatible
T-Harness is not compatible.
Keys required for
programming
1
Keys required
for operation
0
Vehicle Takeover
Refer to the Quick Reference Guide section for more details.
Firmware notes
 Key2GO: Is mandatory to control the immobilizer override in this firmware.
 Fuses: It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each wiring
diagram.
 All connectors are displayed from the wire side (unless specified otherwise).
 Refer to the Vehicle connections section following the installation diagram.
Footnotes
[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin, or if
not supported in data.
[2] Siren: Only required when enabling the security features during module flashing.
[3] TPMS Interrupt: Depending on the vehicle's trim, the TPMS Ignition Interrupt connection may be required to obtain OEM remote
functionality during runtime. Also note that the TPMS light may flash during runtime.