43
13.0 PARKING MONITOR*
This function is designed to monitor and record
any incident that may occur when your car is
parked. The SmartView 72 must be hardwired to
your vehicle's electrical circuit for the function to
be used.
Recording in Parking Monitor mode can be done
in time lapse mode to save memory space on the
micro SD Card.
*
Requires the installation of a 3-wire
hardwire kit.
NAME FUNCTION OPTIONS DEFAULT NOTE
Time
lapse
To turn
on/off
time lapse
mode
On/Off Off When time lapse
mode is turned on
and the car detects
the engine is off, the
recording will be
done in time lapse
mode.
Time
lapse
duration
To change
the
duration of
time lapse
mode
2 hours/
8 hours /
12 hours /
24 hours/
Always on
Always on To select the
duration of time
lapse mode when
your car is parked.
The SmartView 72
will stop recording
after the time lapse
duration expires.
If set to Always on,
time lapse mode will
continue until your
car is re-started.
To Next Page
Loading...
General