14 / 21
Complementary Information
£ This device is designed for type 1 action
£ This device is designed for type 1.b action
£ This device presents an A class software
£ The EMC immunity test has been passed using 230 VAC and 0.5 A.
£ The Ball Pressure Test temperature is 167°F (75°C)
£ The SELV does not exceed 42 VDC
£ The maximum accessible voltage is 16 VDC.
£ All traveling cables permanently installed present an X type anchor.
£ All cables must be able to operate above 176°F (80°C)
£ This product is not repairable. If the device is physically malfunctioning or requires repair, it must be returned to Distech Controls.
To Next Page
Loading...
