10
3Programming mode
Function Parameter Mob. no. Inputs
code
Line assignment 12 0…8 1 #
When making an external call, only telephone line 1 is used to connect
the call. If this line is occupied, a busy tone will be heard.
Line assignment 12 0…8 2 #
When making an external call, only telephone line 2 is used to connect
the call. If this line is occupied, a busy tone will be heard.
Factory setting: 0
3.2.3 Authorisations
Function Parameter Mob. no. Inputs
code
Authorisations 13 1…8 0 #
The handset has authorisation to make both internal and external calls.
Authorisations 13 1…8 1 #
The handset has no authorisation to make external calls. Only internal
calls can be made.
Authorisations 13 0…8 2 #
The handset has no authorisation to make internal or external calls.
Incoming calls can be accepted.
To Next Page
Loading...