113Programming mode
Function Parameter Mob. no. Inputs
code
Authorisations 13 0…8 3 #
The handset has authorisation to make external but does not have
authorisation to make internal calls.
Factory setting: 0
Factory setting for the analogue port of distybase duo plus: 3
3.2.4 Fax subscribers
Function Parameter Mob. no. Inputs
code
Fax subscribers 14 0…8 0 #
This subscriber is a handset for voice calls.
Fax subscribers 14 0…8 1 #
It is possible to register a distybox or the analogue port of the distybase
duo plus with a fax machine or fax modem connected to receive fax calls.
After activating parameter 21 the fax switch will transfer recognised fax
calls directly to this subscriber. Call-waiting tones are not signalled. With a
fax subscriber, any calls cannot be queried using “pick up”. A maximum
of one extension can be set up as a fax subscriber.
Factory setting: 0
3.2.5 De-registering a handset
Function Parameter Mob. no. Inputs
code
De-registering a handset 15 1…8 #
The corresponding handset is no longer registered.
Operating Instructions