153Programming mode
3.2.11 CLIP
Function Parameter Inputs
code
CLIP 24 0 #
Number presentation (CLIP) is deactivated.
CLIP 24 1 #
Number presentation (CLIP) is activated. The number transferred is sent
to the called handset as soon as it is present. This might not work with all
types of handsets.
CLIP 24 2 #
Number presentation (CLIP) is activated. The number transferred is sent
to the called handset in GAP compliant format (recommended setting for
KIRK handsets).
CLIP 24 3 #
Number presentation (CLIP) is activated. The number transferred is sent
to the called handset in a special format. Most of the GAP compliant
handsets are able to work with this format.
CLIP 24 5 #
Number presentation (CLIP) is activated. To indicate the calling line
additional display information (#1 or #2) will be transmitted to the
handset. Depending on handset this information might be shown or not.
In case of doubt do not activate this feature.
Factory setting: 1
Operating Instructions
To Next Page
Loading...