Disty base duo plus - Line Access; Providers

193Programming mode
3.2.16 Line access
Function Parameter Inputs
code
Line access 44 0 #
Automatic line access is disabled. On outgoing calls the internal dial tone
is supplied. The line will be occupied after dialling an external number.
Line access 44 1 #
Automatic line access is enabled. On outgoing calls the line will be
occupied immediately and the external dial tone is supplied. When dialling
an internal number the line will be released again.
Factory setting: 1
The analogue port of distybase duo plus always seizes the assigned line
immediately.
3.2.17 Providers
Function Parameter Prefix Inputs
code
Provider setting 45 xxxxxxxxxx #
(max. 10 figures)
Depending on the setting for parameter 46, the stored prefix is dialled for
any external call.
Factory setting: No prefix stored.
Provider selection 46 0 #
No provider code is dialled.
Operating Instructions