Disty base duo plus - Parameter Query; Parameter Reset

20
3Programming mode
Function Parameter Prefix Inputs
code
Provider selection 46 1 #
The provider code is dialled each time an external call is made.
Factory setting: 0
3.2.18 Parameter query
Function Parameter Inputs
code
Parameter display 51 #
A handset can be used to read the current setting for different
parameters. After entering the relevant parameter code and confirming
this with
#
, replace the telephone receiver. You will then receive a call
from the distybase duo/duo plus/duo exant and the parameter code and
the current status will be shown on the telephone display.
Flash time example:
Input
#95123#
=> output 23-010 => flash time (10*10 ms = 100
ms)
Display registered handsets example:
Input
#9515#
=> output e.g. 1121314150607081 => handsets 1, 2,
3, 4, 8 are registered.
Display call assignment example:
Input
#95111#
=> output e.g.1136_23459 => line 1:
subscribers 1, 3, 6 => line 2: subscribers 3, 4, 5 and hunt group call.
3.2.19 Parameter reset
Function Parameter Inputs
code
Parameter reset 90 #
All parameters are reset to the factory settings, the handsets remain
registered unchanged.