Disty base duo plus - Connection Pick-Up (SBCT); Analogue Port

12
3Programming mode
3.2.6 Connection pick-up (SBCT = Single Button Call Transfer)
Function Parameter Mob. no. Inputs
code
SBCT 16 1…8 0#
The partner handset that has been assigned is deleted.
SBCT 16 1…8 Partner
1...8
#
Four pairs of “partner handsets” can be configured. Each handset can
only be part of a specific pair. An active call can be transferred by
pressing the “On” key on the partner handset. This feature functions in
both directions between the partner handsets. It can be used to set up a
call using a handset and subsequently continue the conversation using a
DECT headset. Please bear in mind that a handset with this function is
unable to establish an outgoing call while a call is being made on the
partner handset.
Default setting 0
3.2.7 Analogue port
The analogue port is usable for wired connection of an analogue device
like fax machines, answerphones and modem for communication with
the external network. With parameter 17 incoming calls on the lines can
be assigned to the analogue port.
Function Parameter Inputs
code
Line assignment 17 0 #
No calls are signalled on the analogue port.
Line assignment 17 1 #
Calls to line 1 are signalled on the analogue port.
Line assignment 17 2 #
Calls to line 2 are signalled on the analogue port.