Ditch Witch Cx Series User Manual

Service - 94 Cx Series Operator’s Manual
Procedures
Fluid, Hydraulic
Check before startup. Change every 500 hours.
Check
1. Check level at sight glass (1).
2. Add THF at fill (2) as needed to keep level at
halfway point on sight glass.
Change
1. Remove plug (3) to drain.
2. Install plug.
3. Change filter.
4. Add THF at fill until level is at halfway point
on sight glass.

Ditch Witch Cx Series Specifications

General

Brand	Ditch Witch
Model	Cx Series
Category	Farm Equipment
Language	English