XT1600 Operator’s Manual Specifications - 93
CMW
Tool Carrier Dimensions U.S. Metric
W Bucket width, max 73” 1.8 m
Excavator Dimensions U.S. Metric
V Swing angle from center 130° 130°
T Total swing angle 260° 260°
Performance U.S. Metric
Ground drive speed, forward 3.5/6.8 mph 5.6/10.9 km/h
Ground drive speed, reverse 3.5/6.8 mph 5.6/10.9 km/h
Ground pressure 5.8 psi 0.4 bar
Angle of departure 20° 20°
Tipping capacity 4600 lb 2087 kg
Rated operating capacity @ 35% of tipping capacity 1600 lb 726 kg
Drawbar pull 8800 lb 39.1 kN
Hydraulic System U.S. Metric
Auxiliary: dual gear pumps
Flow rate 15/26 gpm 56.7/98.4 L/min
Pressure 3000 psi 206.8 bar
Ground drive: dual hydrostat
Flow rate 27 gpm 102.2 L/min
Pressure 4400 psi 303.4 bar
To Next Page
Loading...