Controls - 24 XT855 Operator’s Manual
Front Console
CMW
6. Operator presence
indicator
Lights when operator is
seated.
Engine will not start unless this
indicator is lighted.
7. Auxiliary hydraulic fluid
flow/pressure indicator
Light when the attachment
drive switch is in the forward
position. Indicates hydraulic
fluid flow and pressure to the
auxiliary (attachment drive)
system.
IMPORTANT:
• Operator must be in seat for
attachment drive switch to
operate correctly. If operator has
left seat, or if unit was shut down
with switch in the on position,
reset the switch by turning it off,
then on.
• Ensure auxiliary flow and
pressure are off when no
attachment is connected by
turning attachment drive switch
on, then off.
8. Horn To sound horn, press.
9. Hourmeter Displays engine operating
time.
Use these times to schedule service.
Item Description Notes
To Next Page
Loading...
