dji AVATA - Intelligent Flight Battery; Battery Features; Using the Battery

To Next Page

To Previous Page

DJI Avata

User Manual

Intelligent Flight Battery

The Avata Intelligent Flight Battery is a 14.76 V, 2420 mAh battery with smart charging and discharging

functionality.

Battery Features

1. Battery Level Display: The battery level LEDs display the current battery level.

2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to approximately 96%

of the battery level when it is idle for one day, and approximately 60% when idle for ve days. It is normal to

feel moderate heat from the battery, while it is discharging.

3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.

4. Overcharge Protection: The battery stops charging automatically once fully charged.

5. Temperature Detection: To prevent damage, the battery only charges when the temperature is between 5°

and 40° C (41° and 104° F). Charging stops automatically if the temperature of the battery exceeds 50° C

(122° F) during charging.

6. Overcurrent Protection: The battery stops charging if an excess current is detected.

7. Over-Discharge Protection: Discharging stops automatically to prevent excess discharge when the battery is

not in use. Over-discharge protection is not enabled when the battery is in use.

8. Short Circuit Protection: The power supply is automatically cut if a short circuit is detected.

9. Battery Cell Damage Protection: DJI goggles display a warning prompt when a damaged battery cell is

detected.

10. Hibernation Mode: The battery switches o after 20 minutes of inactivity to save power. If the battery level

is less than 10%, the battery enters Hibernation mode to prevent over-discharge after being idle for six

hours. In Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from

hibernation.

11. Communication: Information about the voltage, capacity, and current of the battery is transmitted to the

aircraft.

Refer to the DJI Avata Safety Guidelines and the stickers on the battery before use. Users shall take full

responsibility for all operations and usage.

Using the Battery

Checking the Battery Level

Press the power button once to check the battery level.

LED2

LED3

LED4

LED1

Battery Level LEDs

Power Button

Other manuals for dji AVATA