dji AVATA User Manual

DJI Avata
User Manual
75
© 2022 DJI All Rights Reserved.
Firmware Update
Use one of the following methods to update the rmware:
1. Use the DJI Fly App to update the rmware for the entire set of devices including the aircraft, goggles, and
remote control device.
2. Use DJI Assistant 2 (Consumer Drones Series) to update the rmware for a single device.
Using DJI Fly
Power on the aircraft, goggles, and remote control device. Make sure all the devices are linked. Connect the
USB-C port of the goggles to the mobile device, run DJI Fly, and follow the prompt to update. An internet
connection is required.
Using DJI Assistant 2 (Consumer Drones Series)
1. Power on the device and connect it to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Consumer Drones Series) and log in with a DJI account.
3. Select the device and click “Firmware Update” on the left side of the screen.
4. Select the rmware version.
5. The rmware will be downloaded and updated automatically.
6. The device will restart automatically after the rmware update is complete.
Make sure to follow all the steps to update the rmware, otherwise the update may fail.
The rmware update will take several minutes. When updating the rmware, it is normal for the gimbal
to go limp, and the aircraft to reboot. Wait until the update is complete.
Make sure the computer is connected to the internet during the update.
Make sure that the device has sucient power before updating the rmware.
Do not unplug the USB-C cable during an update.
If there are any additional batteries that needs to be updated after the update is complete, insert it into
the aircraft and power on the aircraft. A prompt will appear in the goggles to update the battery. Make
sure to update the battery before takeo.
Note that the update may reset various ight parameters such as the RTH altitude and the maximum
flight distance. Before updating, take note of your preferred settings and readjust them after the
update.
Aftersales Information
Visit https://www.dji.com/support to learn more about aftersales service policies, repair services, and support.

dji AVATA Specifications

General

Type	Quadcopter
Certification	CE
Product color	Black, Grey
Construction type	Ready-to-fly (RTF)
Suitable for outdoor use	Yes
Maximum speed	- m/s
Number of rotors	4 rotors
Maximum weight capacity	- kg
Maximum operating distance	10000 m
Number of propeller blades	5
Megapixel	- MP
Sensor type	CMOS
Maximum frame rate	100 fps
Optical sensor size	1/1.7 \
Supported video modes	1080p
Video formats supported	H.265
Maximum video resolution	3840 x 2160 pixels
Field of view (FOV) angle	155 °
Bitrate at maximum video resolution	50 Mbit/s
Memory card slot(s)	-
Moving control functions	Backward, Downward, Flying sideways, Forward, Turn left, Turn right, Upward
Operating time	120 min
Number of batteries supported	1

Weight and Dimensions

Weight	1000 g