dji AVATA - Controlling the Aircraft

DJI Avata
User Manual
51
© 2022 DJI All Rights Reserved.
Controlling the Aircraft
The motion controller has two modes: Normal mode and Sport mode. Normal mode is selected by default.
It is recommended to watch the tutorial video in the goggles before using for the rst time. Go to
Settings > Control > Motion Controller > Flight Control > First Flight Tutorial.
Before using for the rst time, practice ying with the motion controller using DJI Virtual Flight.
Motion Controller Aircraft & Goggles Screen Remarks
Press the accelerator to y in the direction
of the circle in the goggles.
Apply more pressure to accelerate. Release
to stop and hover.
The orientation of the aircraft can be
controlled by tilting the motion controller
left and right.
Tilt left to rotate the aircraft
counterclockwise and tilt right to rotate
clockwise. The aircraft hovers in place if the
motion controller is vertically xed.
The tilt angle corresponds to the angular
velocity of the rotation of the aircraft.
The greater the tilt angle of the motion
controller, the faster the aircraft will rotate.
The circle in the goggles will move left
and right and the video transmission will
change accordingly.
Tilt the motion controller up or down to
control the tilt of the gimbal.
The tilt of the gimbal changes with the tilt
of the motion controller accordingly and is
always consistent with the orientation of
the motion controller.
The circle in the goggles will move up
and down and the video transmission will
change accordingly.
To control the ascent or descent of the
aircraft, rst tilt the motion controller 90°
up or down. Once the circle in the goggles
goes into the ascend
or descend
icon, press the accelerator to make the
aircraft ascend or descend.