EasyManuals Logo

dji AVATA User Manual

dji AVATA
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
DJI Avata
User Manual
7
© 2022 DJI All Rights Reserved.
Preparing the Aircraft
1. Remove the gimbal protector from the camera.
2. Remove the Intelligent Flight Battery and use a USB charger to charge the battery. It takes approximately 90
minutes to fully charge an Intelligent Flight Battery.
3
1
2
1
2
≥30 W
USB PD
It is recommended to use the DJI 30W USB-C Charger or other USB Power Delivery chargers.
It is recommended to attach a gimbal protector to protect the gimbal when the aircraft is not in use.
Adjust the camera to the horizontal position, then install the gimbal protector and make sure it is
secure.
Make sure to remove the gimbal protector before powering on the aircraft. Otherwise, it may aect the
aircraft self-diagnostics.

Other manuals for dji AVATA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji AVATA and is the answer not in the manual?

dji AVATA Specifications

General IconGeneral
TypeQuadcopter
CertificationCE
Product colorBlack, Grey
Construction typeReady-to-fly (RTF)
Suitable for outdoor useYes
Maximum speed- m/s
Number of rotors4 rotors
Maximum weight capacity- kg
Maximum operating distance10000 m
Number of propeller blades5
Megapixel- MP
Sensor typeCMOS
Maximum frame rate100 fps
Optical sensor size1/1.7 \
Supported video modes1080p
Video formats supportedH.265
Maximum video resolution3840 x 2160 pixels
Field of view (FOV) angle155 °
Bitrate at maximum video resolution50 Mbit/s
Memory card slot(s)-
Moving control functionsBackward, Downward, Flying sideways, Forward, Turn left, Turn right, Upward
Operating time120 min
Number of batteries supported1
Weight and Dimensions IconWeight and Dimensions
Weight1000 g

Related product manuals