EasyManua.ls Logo

dji AVATA - Page 49

dji AVATA
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI Avata
User Manual
49
© 2022 DJI All Rights Reserved.
c. Advanced Safety Settings include aircraft signal lost action, enabling/disabling AirSense, and emergency
propeller stop. The aircraft can be set to hover, land, or RTH when it loses the signal from the remote
controller devices. If the emergency propeller stop is enabled, the motors can be stopped mid-
ight anytime once the user presses twice on the lock button of the motion controller or performs a
combination stick command (CSC) on the remote controller. If the switch is disabled, the motors can
only be stopped by pressing twice on the lock button of the motion controller or performing a CSC mid-
ight in an emergency situation such as if a collision occurs, a motor stalls, the aircraft rolls in the air, or
the aircraft is out of control and is ascending or descending quickly.
Stopping the motors mid-ight will cause the aircraft to crash.
Control
Set the parameters for the remote controller or the motion controller. Calibrate the gimbal or adjust aircraft
parameters such as the gimbal tilt speed.
Camera
a. Camera parameters such as ISO, shutter, EV, and WB can be adjusted. Also, the camera mode can be
set to auto or manual.
b. Set video quality, camera FOV, EIS (electronic image stabilization), gridlines, enable or disable the
center point of the screen, and format the microSD card. Note that the data cannot be recovered after
formatting. Operate with caution.
c. In Advanced Camera Settings, users can set the recording device, color, and anti-icker, as well as
enable or disable auto record on takeo, and video subtitles.
d. Select Reset Camera Parameters settings to restore all camera settings to default.
• Display
Adjust screen brightness, zoom, and display or hide the Home Point.
• About
a. View device information, such as the serial number and the rmware of the goggles and linked devices.
b. Select the system language.
c. Select Reset All to reset the goggles and the linked devices to their default settings.
d. Switch aircraft model.

Other manuals for dji AVATA

Related product manuals