©
2018 DJI All Rights Reserved.
21
INSPIRE 2
SERIES User Manual
The aircraft automatically adjusts its speed when it senses an obstacle in front, or if it ies too close to the
ground. The DJI GO 4 app will show a prompt if the aircraft ies over an obstacle or to the left or right of
the obstacle. However, this feature should not be relied upon for navigation between obstacles. Failsafe
procedures will override TapFly. If the GPS signal weakens, the aircraft will exit autonomous ight and
return to home.
12
R
09:29
AE
P-GPS
AF/ MF
200 0.3
5.61/200
4KP3020:12 384G
4KP30
74%
70%
4.07V
4.07V
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
In Flight (GPS)
5000K
Custom
Exit TapFly
Use the following methods to exit TapFly:
1. Tap “ ” button on the screen.
2. Pull back the pitch stick on the remote controller and hold for more than 3s.
3. Press the Intelligent Flight Pause button on the remote controller.
30M
30M
OR OR
Pause button
Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue ying or begin
manual ight.
ActiveTrack
ActiveTrack allows you to mark and track a moving object on your mobile device screen. The
aircraft will automatically avoid obstacles in its ight path. No external tracking device is required.
The Inspire 2 can automatically identify and trace bikes and other vehicles, people and animals,
and use different tracking strategies for each.
To Next Page
Loading...
Need help?
General
