©
2018 DJI All Rights Reserved.
41
INSPIRE 2
SERIES User Manual
Optimal Transmission Range
The signal transmission between aircraft and remote controller perform best within the range that
displayed in the picture shown below:
Ensure the aircraft is ying within the optimal transmission range. Adjust the distance and position
between the operator and the aircraft to achieve optimal transmission performance. The position
of the antennas required for optimal transmission range varies in the frequency of 5.8G and 2.4G.
Please place the antennas based on the actual operating frequency.
Dual Remote Controllers Mode
More than one remote controller can connect to the same aircraft in Dual Remote Controller mode.
In Dual Controllers mode, the “Master” remote controller operator controls the orientation of the
aircraft, while the “Slave” remote controller controls the movement of the gimbal and camera
operation. “Master” and "Slave" remote controllers communicate each other via WiFi.
Optimal Transmission RangeOptimal Transmission Range
5.8G
90° 60°
2.4G
Strong Weak
Connecting Mobile Device
Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder
to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your
mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of
the cable into your mobile device, and the other end into the USB port on the back of the remote controller.
3
1
2
To Next Page
Loading...
Need help?
General
