dji Inspire 2 Series User Manual

40
©
2018 DJI All Rights Reserved.
INSPIRE 2 SERIES User Manual
1.
Raise:
Raise the landing gear to its upper most position.
2.
Lower:
The landing gear will lower to its lowest position for landing.
Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear
is lowered before landing.
The aircraft will not be able to land if the landing gear does not lower.
RTH button
Press and hold this button to start the Return to Home (RTH) procedure. The aircraft will then return
to the last recorded Home Point. Press this button again to cancel the RTH procedure and regain
the control of the aircraft.
Determine RTH status by sound:
Single beep... Request to return, but not receive the respond from the aircraft yet.
Double beep... RTH in progress.

dji Inspire 2 Series Specifications

General

Battery Capacity	4280 mAh
Battery Voltage	22.8 V
Operating Temperature	-20°C to 40°C
Camera Compatibility	Zenmuse X7, Zenmuse X5S, Zenmuse X4S
Transmission Distance	7 km (FCC), 4 km (CE)
Max Ascent Speed	5 m/s
Max Descent Speed	4 m/s
Operating Frequency	2.4 GHz and 5.8 GHz
Gimbal	3-axis
Satellite Systems	GPS/GLONASS
Charging Temperature Range	5°C to 40°C
Live View Quality	1080p
Max Tilt Angle	35°
Transmitter Power (EIRP)	26 dBm (FCC), 20 dBm (CE)
Video Transmission System	DJI Lightbridge