©
2018 DJI All Rights Reserved.
39
INSPIRE 2
SERIES User Manual
Lower Raise
Position Figure Flight Mode
Position
1
P-mode
Position
2
S-mode
Position
3
A-mode
Flight Mode Switch
Toggle the switch to select the desired ight mode.
Choose between; P-mode, S-mode and A- mode.
Position 1
Position 2
Position 3
P-mode (Positioning):
P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,
stereo Vision System and Infrared Sensing System to stabilize, avoid obstacles or track moving subjects.
Advanced features such as TapFly and ActiveTrack are enabled in this mode.
S-mode (Sport):
The handling gain values of the aircraft are adjusted to enhance aircraft maneuverability.
Note that Obstacle Sensing systems are disabled in this mode.
A-mode (Attitude):
When neither the GPS nor the Vision System is available, the aircraft will only use its
barometer for positioning to control the altitude.
The Flight Mode is locked in P-mode by default, regardless of switch position. To switch ight modes, go
to Camera view in the DJI GO 4 app, tap and enable “Multiple Flight Modes”. After enabling multiple
ight modes, toggle the switch to P and then to S to y in Sport Mode.
Transformation Switch / RTH Button
The Transformation Switch / RTH Button combination serves two functions. Toggle the switch up or
down to raise or lower the landing gear. Or, press the button to activate the Return to Home (RTH)
procedure. Intelligent landing gear will automatically raise after takeoff and lower when landing.
They can also be controlled manually using the Transformation Switch.
Transformation Switch
This switch has two positions. The effect of toggling the switch to any of these positions is dened below:
Adjusting Controller Sticks
Hold and twist the controller sticks clockwise or counter clockwise to
adjust the length of the controller sticks. A proper length of controller
sticks can improve the controlling accuracy.
To Next Page
Loading...
Need help?
General
