MAVIC 2 ENTERPRISE Advanced
User Manual
58
©
2021 DJI All Rights Reserved.
Flight Test
Takeo/Landing Procedures
1. Place the aircraft in an open, at area with the Aircraft Status Indicators facing towards you.
2. Power on the aircraft and the remote controller.
3. Launch DJI Pilot and enter the live view.
4. Wait until the Aircraft Status Indicator blinks green indicating that the Home Point has been
recorded and it is now safe to y.
5. Push the throttle stick up slowly to take o.
6. To land, hover over a level surface and gently push the throttle stick down to descend.
7. After landing, hold the throttle stick down completely until the motors stop.
8. Power o the Intelligent Flight Battery before the remote controller.
Video Suggestions and Tips
1. The pre-ight checklist is designed to help you y safely and to make sure that you can shoot
video during ight. Go through the full pre-ight checklist before each ight.
2. Select the gimbal operation mode in DJI Pilot.
3. Only shoot video when ying in P-mode or T-mode.
4. DO NOT y in adverse weather conditions such as when it is raining or windy.
5. Choose the camera settings that best suit your needs. Settings include photo format and exposure
compensation.
6. Perform ight tests to establish ight routes and to preview scenes.
7. Push the control sticks gently to keep the aircraft movement smooth and stable.
It is important to understand the basic ight guidelines for the safety of both you and
those around you.
DO NOT forget to read the disclaimer and safety guidelines.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
