MAVIC 2 ENTERPRISE Advanced
User Manual
8
©
2021 DJI All Rights Reserved.
* Attach the gimbal cover when not in use.
1) Hold the gimbal in place and insert the gimbal clamp
between the aircraft and the gimbal.
2) Make sure the hooks on the gimbal protector are
locked in the grooves of the aircraft. Lower the gimbal
protector over the gimbal and secure with the buckle.
The buckle will click when it is securely attached.
3. Attach the propellers with white marks to the motors with white marks. Press the propeller down
onto the motors and turn until it is secure. Attach the unmarked propellers to the unmarked
motors. Unfold all the propeller blades.
4. All Intelligent Flight Batteries are in Hibernation mode before shipping to ensure safety. Use the
provided AC power adapter to charge and activate Intelligent Flight Batteries for the rst time. To
charge an Intelligent Flight Battery after ight, remove from the aircraft and attach to the AC power
adapter.
Grooves Hooks
Gimbal clamp
A
A
Power Outlet
100~240 V
Charging Time:
~1 hour 30 minutes
Unfold the front arms and propellers before unfolding the rear arms.
It is normal for there to be friction on the arms and aircraft due to the folding design of Mavic 2
Enterprise Advanced.
Make sure the gimbal cover is removed and all arms and propellers are unfolded before powering
on the aircraft. Otherwise, it may aect the aircraft’s self-diagnostics.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
