dji Mavic 3M - Page 81

DJI Mavic 3M User Manual
81
©
2023 DJI All Rights Reserved
.
Area Route
Area route has Ortho Collection and Oblique Collection, the aircraft can automatically
complete the data collection for the aerial photogrammetry of the planned area along the
s-shaped route according to the route parameters.
Smart Oblique and Terrain Follow can be enabled in the area route.
Oblique Collection
Oblique collection generates five s-shaped routes in the mapping area, respectively
controlling the gimbal to collect orthophoto and oblique photos in 5 different directions,
which can be used to make real 3D models.
Smart Oblique
Smart Oblique is an innovative oblique photograph solution that can be enabled in the
Oblique Collection settings. Automatically control the gimbal to capture images in different
required positions. The aircraft only needs to fly two mutually perpendicular s-shaped
routes to collect orthophoto and oblique photos required for 3D reconstruction, which
greatly improves operational efficiency. The aircraft will only take photos essential to
reconstruction at the edge of the mapping area, which reduces the number of photos taken
and greatly improves post-processing efficiency.
Smart Oblique is only supported when using the RGB camera.
The gimbal tilt for capturing images may vary in different segments of the flight route. All of
the photos taken depend on the mapping area.
a. The gimbal tilt for capturing images may vary in different segments of the flight route.
During a smart oblique flight, the aircraft will fly two mutually perpendicular s-shaped
routes. The two routes will photograph the mapping area from different angles in
sequence.
The First Flight Route
The Second Flight Route
Forward
Forward
Backward
BackwardOrthophoto
Shooting Direction