dji Mavic 3M - Aircraft Status Indicator

DJI Mavic 3M User Manual
35
©
2023 DJI All Rights Reserved
.
• The responsiveness of the aircraft significantly increases in Sport mode, which means a
small control stick movement on the remote controller translates into the aircraft moving
a large distance. Make sure to maintain adequate maneuvering space during flight.
• When switching the GNSS to the BeiDou satellite positioning system in DJI Pilot 2,
the aircraft only uses a single positioning system and the satellite search capability
becomes poor. Fly with caution.
Aircraft Status Indicator
DJI Mavic 3M has front LEDs and aircraft status indicators.
When the aircraft is powered on, but the motors are not running, the front LEDs glow solid
red to display the orientation of the aircraft.
When the aircraft is powered on, but the motors are not running, the aircraft status
indicators will display the current status of the flight control system. Refer to the table
below for more information about the aircraft status indicators.
Front LED
Aircraft Status Indicator
Front LED
Aircraft Status
Indicator
Normal States
Blinks red, yellow, and green
alternately
Powering on and performing self-
diagnostic tests
×4 Blinks yellow four times Warming up
Blinks green slowly GNSS enabled
×2 Blinks green twice repeatedly Vision systems enabled
Blinks yellow slowly
GNSS and vision systems disabled (ATTI
mode enabled)
Warning States
Blinks yellow quickly Remote controller signal lost
Blinks red slowly Takeoff is disabled, e.g. low battery*
Aircraft Status Indicators Descriptions