dji Mavic 3M - Intelligent Flight Battery

DJI Mavic 3M User Manual
39
©
2023 DJI All Rights Reserved
.
Intelligent Flight Battery
The Mavic 3 Intelligent Flight Battery is a 15.4V, 5000mAh battery with smart charging and
discharging functionality.
Battery Features
1. Battery Level Display: the battery level LEDs display the current battery level.
2. Auto-Discharging: to prevent swelling, the battery automatically discharges to 96%
battery level when idle for three days and automatically discharges to 60% battery level
when idle for nine days (the default is nine days, but it can be set to 4-9 days in the app).
It is normal to feel moderate heat being emitted from the battery during the discharging
process.
3. Balanced Charging: during charging, the voltages of the battery cells are automatically
balanced.
4. Overcharge Protection: the battery stops charging automatically once fully charged.
5. Temperature Detection: to prevent damage, the battery only charges when the
temperature is between 5° and 40° C (41° and 104° F).
6. Overcurrent Protection: the battery stops charging if an excess current is detected.
7. Over-Discharge Protection: discharging stops automatically to prevent excess discharge
when the battery is not in use. Over-discharge protection is not enabled when the
battery is in use.
8. Short Circuit Protection: the power supply is automatically cut if a short circuit is
detected.
9. Battery Cell Damage Protection: the app will display a warning prompt when a damaged
battery cell is detected.
10. Hibernation Mode: the battery switches off after 20 minutes of inactivity to save power.
If the battery level is less than 5%, the battery enters Hibernation mode to prevent over-
discharge after being idle for six hours. In Hibernation mode, the battery level indicators
do not illuminate. Charge the battery to wake it from hibernation.
11. Communication: information about the voltage, capacity, and current of the battery is
transmitted to the aircraft.
Refer to the Safety Guidelines and the stickers on the battery before use. Users shall take
full responsibility for all operations and usage.