dji Mavic 3M - Map View

DJI Mavic 3M User Manual
70
©
2023 DJI All Rights Reserved
.
AR Projection
DJI Pilot 2 supports AR Projection of the following:
a. Home Point: when the home point is beyond the range of the current view, it will still be
displayed on the edge of the view. The aircraft can be turned toward the home point,
following the direction of the arrow.
b. PinPoints: a PinPoint appears bigger when near the aircraft and smaller when it is far.
This allows the users to judge the distance between the PinPoint and the aircraft based
on the size of the PinPoint. When a PinPoint selected is beyond the range of the current
view, it will still be displayed on the edge of the view. The aircraft can be turned toward
the PinPoint following the direction of the arrow.
c. Waypoints: in a flight task, the two waypoints that the aircraft is about to pass will be
projected on the camera view. The next waypoint to be reached will appear as a solid
triangle marked with a serial number, while the subsequent waypoint will appear as a
dotted triangle marked with a serial number.
d. ADS-B Manned Airplane: when a manned airplane is detected nearby, it will be projected
on the camera view. Ascend or descend the aircraft as soon as possible to avoid the
manned airplane by following the prompted instructions.
Map View
4
3
5
6
7
1
2
1. Tap to draw a line on the map.
2. Tap to draw an area on the map.
3. Tap to clear the flight route of the aircraft.
4. Map Layer Selection: tap to select a satellite or street map (standard mode) according to
operational requirements. If external maps in MBTiles format have been imported using
DJI Pilot 2 by tapping Profile on the homepage > Map Settings > MapTiler > Custom
Layer, one or more of the imported maps in the MBTiles format can be selected to add
above the currently shown MapTiler map.