dji Mavic 3M - Page 69

DJI Mavic 3M User Manual
69
©
2023 DJI All Rights Reserved
.
Multispectral Camera View
This section mainly sets out the differences with the RGB camera view. Refer to the
introduction of the Camera View section for more details.
1. Vegetation Index and Multispectral Camera
Vegetation Index (VI): displays the real-time vegetation index view. NDVI, GNDVI, and
NDRE index maps are supported.
Multispectral Camera (MS): select G, R, RE, or NIR, and the corresponding multispectral
camera view will be displayed. Users can adjust the corresponding mode and
parameters of the camera.
2. Color Map: set the value range for the rendered display color scale of the vegetation
index. The color close to the value 1 in the color map indicates better growth of the
crop. The default range is [-1, 1]. Users can set the min and max values in a range
of [-1, 1] respectively, according to their requirements.
3. Display Mode: the multispectral screen displays the multispectral view alone by
default. Tap to enable or disable the side-by-side view. When enabled, both the
multispectral and RGB views will be displayed side by side.
Color map and display mode settings are only supported in the vegetation index view.
1 32