dji Mavic 3M - DJI Airsense

DJI Mavic 3M User Manual
29
©
2023 DJI All Rights Reserved
.
DJI AirSense
Airplanes with an ADS-B transceiver will actively broadcast flight information, including
locations, flight paths, speeds, and altitudes.
DJI aircraft incorporated with DJI AirSense technology can receive flight information
broadcast from ADS-B transceivers that comply with 1090ES or UAT standards within a
radius of 10 kilometers. Based on the received flight information, DJI AirSense can analyze
and obtain the location, altitude, orientation, and velocity of the surrounding manned
airplanes and compare such figures with the DJI aircraft to calculate in real-time the
potential risk of collision with the surrounding manned airplanes. DJI AirSense will display a
warning message in DJI Pilot 2 according to the risk level.
DJI AirSense only issues warning messages on approaches by specific manned airplanes
under special circumstances. Always fly your aircraft within your visual line of sight and
be cautious at all times to ensure flight safety. Please be aware that DJI AirSense has the
following limitations:
1. DJI AirSense can only receive messages sent by airplanes installed with an ADS-B
Out device that is in compliance with 1090ES (RTCA DO-260) or UAT (RTCA Do-282)
standards. DJI devices cannot receive broadcast messages from or display warnings on
airplanes not equipped with properly functioning ADS-B Out devices.
2. If there is an obstacle between a manned airplane and a DJI aircraft, DJI AirSense will
not be able to receive ADS-B messages from the airplane or send warnings to the user.
Keenly observe your surroundings and fly with caution.
3. Warning prompts may be delayed if DJI AirSense experiences any interference from the
surrounding environment. Keenly observe your surroundings and fly with caution.
4. Warning prompts may not be received if the DJI aircraft is unable to obtain information
on its location.
5. DJI AirSense cannot receive ADS-B messages from manned airplanes or send warnings
to the user when it is disabled or misconfigured.
When the DJI AirSense system detects a risk, the AR projection display will appear in DJI Pilot 2,
intuitively showing the distance between the DJI aircraft and the airplane and issuing a warning
alert. Users should follow the instructions in DJI Pilot 2 upon receiving the alert.
1.
Notice:
a blue airplane icon will appear on the map.
2.
Caution:
the app will display the message: "Manned aircraft detected nearby. Fly with
caution." A small orange square icon with the distance information will appear on the
camera view, and an orange airplane icon will appear on the map view.
3.
Warning:
the app will display the message: "Collision risk. Descend or ascend
immediately." If the user is not operating, the app will display: "Collision risk. Fly with
caution." A small red square icon with the distance information will appear on the
camera view, and a red airplane icon will appear on the map view. The remote controller
will vibrate to alert.