dji Mavic 3M - Using for the First Time

DJI Mavic 3M User Manual
7
©
2023 DJI All Rights Reserved
.
• The maximum flight time was tested in an environment without wind while flying at a
consistent flight speed of 20.1 mph (32.4 kph). The maximum flight speed was tested at
sea level altitude without wind. Note that the maximum flight speed is limited to 42 mph
(68.4 kph) in the European Union (EU). These values are for reference only.
• The remote control devices reach their maximum transmission distance (FCC) in a wide-
open area with no electromagnetic interference at an altitude of about 120 m (400 ft).
The maximum transmission distance refers to the maximum distance that the aircraft
can still send and receive transmissions. It does not refer to the maximum distance
the aircraft can fly in a single flight. The maximum runtime was tested in a laboratory
environment. This value is for reference only.
• 5.8 GHz is not supported in certain regions. Observe local laws and regulations.
Using for the First Time
DJI Mavic 3M is folded before being packaged. Follow the steps below to unfold the aircraft
and remote controller.
Preparing the Aircraft
1. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety.
Use the provided charger to charge and activate the Intelligent Flight Batteries for the
first time. It takes approximately 1 hour and 20 minutes to fully charge an Intelligent
Flight Battery.
DJI Pilot 2 App: Vegetation index maps such as NDVI, GNDVI, or NDRE can be viewed in real
time in the DJI Pilot 2 app for information on plant health, plant growth, soil conditions, and
more.
Cloud-Based Operation: DJI Mavic 3M can perform flight tasks in real time while uploading
photos to the DJI SmartFarm platform (www.djiag.com) in application scenarios such
as agricultural field scouting and aerial surveys. Automatically create field scouting or
start reconstruction tasks, which can produce better scouting results to conduct growth
monitoring or other agronomic activities.