dji mavic - Precision Landing

Aircraft
©
2016 DJI. All Rights Reserved.
15
Mavic Pro User Manual
Critical Low
battery level
warning
The aircraft
must land
immediately.
Aircraft status
indicator blinks
RED quickly.
The DJI GO app display will
ash red and the aircraft will
start to descend. The remote
controller will sound an alarm.
Allow the aircraft to
descend and land
automatically.
Estimated
remaining
ight time
Estimated
remaining ight
based on current
battery level.
N/A N/A N/A
When Critical battery level warning is triggered and the aircraft begins to land automatically,
you may push the left stick upward to make the aircraft hover at its current altitude, giving you
an opportunity to navigate to a more appropriate landing location.
The colored zones and markers on the battery level indicator bar reect the estimated
remaining ight time. They are automatically adjusted according to the aircraft’s current
location and status.
Precision Landing
The aircraft will automatically scan and attempt to match the terrain features underneath during RTH. As
soon as the current terrain features are match with the home point terrain features, the aircraft will start
landing immediately, in the attempt to achieve precision landing. The DJI GO app will prompt terrain
feature matching failure, if the matching is failed.
The performance of Precision Landing is subject to the following conditions:
a. Home point is recorded upon take off, and it will not be refreshed during the ight.
b. Aircraft must take off vertically and the take off altitude is greater than 7 meters.
c. Home point terrain feature remains largely unchanged.
d. Home point terrain with no distinctive feature will affect the performance.
e. Light condition cannot be too light nor too dark.
The following actions are available during landing:
a. Pull throttle down to accelerate landing speed.
b. Push throttle elsewhere to abort the current landing.