To Next Page

To Previous Page

DJI Mic 2

User Manual

Maintenance

Charging the Battery

Charging with the DJI Mic 2 Charging Case

It is recommended to charge the charging case using a 5 V/2 A charger. The charging case has

a built-in battery with a 3250 mAh capacity. Place the transmitter and receiver into the charging

case to begin charging. When the charging case is open, the receiver displays the battery level

of the three devices and the remaining recording time of the transmitter. The transmitter and

receiver will automatically power on once removed from the charging case.

Storing DJI Mic 2

The DJI Mic 2 charging case holds two transmitters with clip magnets, two mobile device

adapters , and a receiver. The mobile device adapter can also be attached on the receiver and

placed together.

≥ 5 V/2 A

Charging the Transmitters and Receiver

It is recommended to use a charging brick with 5 V/1 A specications to charge the transmitters

and receiver via the DJI Mic USB-C Splitter Charging Cable. It takes about 70 minutes to fully

charge the transmitters and receiver.

Questions and Answers:

Need help?

Do you have a question about the dji MIC 2 and is the answer not in the manual?

dji MIC 2 Specifications

General

Type	-
Noise reduction	Yes
Microphone frequency	50 - 20000 Hz
Equivalent noise level	21 dB
Microphone direction type	Omnidirectional
Maximum sound pressure level (1kHz)	120 dB
Device interface	Bluetooth
Connectivity technology	Wireless
Maximum operating distance	250 m
Product color	Black
Battery type	Built-in battery
Power source	Battery
Battery voltage	3.87 V
Battery capacity	360 mAh
Battery life (max)	6 h
Number of products included	2 pc(s)