dji MIC 2 User Manual

DJI Mic 2 User Manual
©
2024 DJI All Rights Reserved.
13
Using with a Camera
To record and transmit audio to a camera, attach the receiver to a camera using the cold shoe
on the receiver, then connect the receiver to the microphone port of the camera using the
camera cable provided, as shown below.
• When using the microphone with a camera, it is recommended to increase receiver
gain and decrease camera gain for enhanced audio capture. Refer to the Instructions
on Recommended Gain for Camera Setup for more information.
OUT
TX1TX1 TX2TX2

dji MIC 2 Specifications

General

Type	-
Noise reduction	Yes
Microphone frequency	50 - 20000 Hz
Equivalent noise level	21 dB
Microphone direction type	Omnidirectional
Maximum sound pressure level (1kHz)	120 dB
Device interface	Bluetooth
Connectivity technology	Wireless
Maximum operating distance	250 m
Product color	Black
Battery type	Built-in battery
Power source	Battery
Battery voltage	3.87 V
Battery capacity	360 mAh
Battery life (max)	6 h
Number of products included	2 pc(s)

Weight and Dimensions

Depth	30.96 mm
Width	46.06 mm
Height	21.83 mm
Microphone weight	28 g
Receiver dimensions (WxDxH)	54.2 x 28.36 x 22.49 mm