36
©
2022 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
Make sure there are no stickers or objects on the gimbal before taking o. When the aircraft is
powered on, DO NOT tap or knock the gimbal. Take o from open and at ground to protect the
gimbal.
Precision elements in the gimbal may be damaged in a collision or impact, which may cause the
gimbal to function abnormally.
Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
A gimbal motor may enter protection mode in the following situations: a. The aircraft is on uneven
ground and the gimbal is impacted. b. The gimbal experiences excessive external force, such as
during a collision.
DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any
extra payload to the gimbal as this may cause the gimbal to function abnormally or even lead to
permanent motor damage.
Make sure to remove the gimbal protector before powering on the aircraft. Make sure to mount the
gimbal protector when the aircraft is not in use.
Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal will
recover full functionality once it is dry.
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, do so through
the camera view in DJI Fly. Press the screen until an adjustment bar appears and drag up and down
to control the camera’s tilt. Tap the Landscape/Portrait Mode Switch in DJI Fly to switch between the
two gimbal roll angles. The roll axis will rotate to -90° when Portrait Mode is enabled, and back to 0° in
Landscape Mode.
Gimbal Mode
Two gimbal operation modes are available. Switch between the dierent operation modes in DJI Fly.
Follow Mode: The angle between the gimbal’s orientation and aircraft front remains constant at all times.
Users can adjust the gimbal tilt. This mode is suitable for shooting stills.
FPV Mode: When the aircraft is ying forward, the gimbal synchronizes with the movement of the aircraft
to provide a rst-person ying experience.
-90°
0°
60°
Gimbal and Camera
Gimbal Prole
The DJI Mini 3 Pro 3-axis gimbal stabilizes the camera, allowing you to capture clear and steady images
and videos at high ight speed. The gimbal has a control tilt range of -90˚ to +60˚, and two control roll
angles of -90˚ (portrait) and 0˚ (landscape).
To Next Page
Loading...
Need help?
General
