dji MINI 3 PRO

72
©
2022 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
Make sure to follow all the steps to update the rmware, otherwise the update may fail.
The rmware update will take approximately 10 minutes. It is normal for the gimbal to go limp, aircraft
status indicators to blink, and the aircraft to reboot. Wait patiently until the update is complete.
Make sure the computer is connected to the internet during the update.
Before performing an update, make sure the Intelligent Flight Battery has at least 40% power and the
remote controller 30%.
Do not unplug the USB-C cable during an update.
Aftersales Information
Visit https://www.dji.com/support to learn more about aftersales service policies, repair services, and
support.