DJI Mini 3
User Manual
25
©
2022 DJI All Rights Reserved.
How to Charge
1. Insert the batteries into the charging hub until there is a click.
2. Connect the charging hub to a power outlet (100-240V, 50/60 Hz) using a USB-C cable and a
DJI 30W USB-C charger or other USB Power Delivery chargers.
3. The battery with the highest power level will be charged first. The rest will be charged in
sequence according to their power levels. The corresponding status LEDs will display the
charging status (see table below). After the battery is fully charged, the corresponding LEDs
will change to solid green.
Status LEDs Descriptions
Charging Status
Blinking Pattern Description
Status LEDs in an array blink
successively (quickly)
The battery in the corresponding battery port is being
charged using a Quick Charge charger.
Status LEDs in an array blink
successively (slowly)
The battery in the corresponding battery port is being
charged using a normal charger.
Status LEDs in an array are solid
The battery in the corresponding battery port is fully
charged.
All status LEDs blink in sequence No battery is inserted.
Battery Level
Each battery port of the charging hub has its corresponding status LED array, from LED1 to
LED4 (left to right). Check battery levels by pressing the function button once. The battery level
LED statuses are the same as those on the aircraft. For details, refer to aircraft battery level
LEDs statuses and descriptions.
Abnormal Status
The LED status for battery abnormality is the same as that on the aircraft. Refer to the Battery
Protection Mechanisms section for details.
•
It is recommended to use a DJI 30W USB-C Charger or other USB Power Delivery
chargers to power the charging hub.
•
The environmental temperature affects the charging speed. Charging is faster in a
well-ventilated environment at 25° C.
•
The charging hub is only compatible with BWX162-2453-7.38 Intelligent Flight Battery
and BWX162-3850-7.38 Intelligent Flight Battery Plus. DO NOT use the charging hub
with other battery models.
•
Place the charging hub on a flat and steady surface when in use. Make sure the device
is properly insulated to prevent fire hazards.
•
DO NOT touch the metal terminals on the charging hub.
•
Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
