DJI Mini 3
User Manual
36
©
2022 DJI All Rights Reserved.
Battery Level LEDs
Blinking Pattern Battery Level
75%~100%
50%~75%
25%~50%
1%~25%
Remote Controller Alert
The remote controller beeps when there is an error or warning. Pay attention when prompts
appear on the touch screen or in DJI Fly. Slide down from the top and select Mute to disable all
alerts, or slide the volume bar to 0 to disable some alerts.
The remote controller sounds an alert during RTH. The RTH alert cannot be cancelled. The
remote controller sounds an alert when the battery level of the remote controller is low (6% to
10%). A low battery level alert can be cancelled by pressing the power button. The critical low
battery level alert, which is triggered when the battery level is less than 5%, cannot be cancelled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote
controller is positioned towards the aircraft as depicted below.
Optimal Transmission
•
DO NOT use other wireless devices operating at the same frequency as the remote
controller. Otherwise, the remote controller will experience interference.
•
A prompt will be displayed in DJI Fly if the transmission signal is weak during flight.
Adjust the remote controller orientation to make sure that the aircraft is in the optimal
transmission range.
Weak Signal