dji ZENMUSE X7 User Manual

12
©
2018 DJI All Rights Reserved.
ZENMUSE X7 User Manual
Enabling the Built-in ND Filter of the 16 mm Lens
Launch the DJI GO 4 app and go to the camera page, then tap > > ND Filter to enable
the built-in ND 4 lter.
Camera Controls
Press the Shutter Button to capture photos or the Record Button to record videos. Adjust the
camera's tilt using the left dial. Turn the right dial to adjust camera settings.
3
4
5
67
1
2
1. Left Dial
Scroll this dial to control tilt the gimbal. Scroll this dial while pressing the C1 to control gimbal
yaw; Scroll this dial while pressing C2 to control tilt the FPV camera.
2. Recording Button
Press once to start video recording. Press again to stop recording.
3. Shutter Button
Press to take a photo. If burst mode is selected, the set number of photos will be taken with
one press.
4. Intelligent Flight Pause Button
Press once to exit from TapFly, ActiveTrack, and Advanced modes.
5. Right Dial
Press once and then scroll to set camera settings. Re-activate this function after 10s free of
operation.
6. C2 Button
Set in DJI GO 4 app.
7. C1 Button
Set in DJI GO 4 app.

dji ZENMUSE X7 Specifications

General

Brand	dji
Model	ZENMUSE X7
Category	Digital Camera
Language	English