dji ZENMUSE X7 User Manual

16
©
2018 DJI All Rights Reserved.
ZENMUSE X7 User Manual
Tap to zoom in on the waveform in the middle of the screen to check the color balance. Tap
to switch between RGB and black-and-white waveforms.
Tap to disable the color waveform and go back to FPV. To enable the color waveform again,
tap
> >
Enable Color Waveform.
Advanced Settings
Exposure Mode
Tap > to choose from the different exposure modes, including: Auto, Aperture Priority
(A), Shutter Priority (S), Manual Exposure (M). By setting different EV values, a variety of ex-
posure can be achieved in AUTO, S, and A mode. ISO values can be set in all modes. When
the aircraft is in P/S/A mode, you can choose to set the ISO automatically or manually.
Manual mode is recommended when recording videos using CINESSD (e.g.,
CinemaDNG or ProRes). When using auto-exposure modes (including AUTO, A, and S),
the frame of the image may icker.
1. Auto
Tap > > AUTO. The shutter speed and aperture are set automatically to obtain the
correct exposure.
2. Aperture Priority (A)
Tap > > A. Set your required aperture, while the camera chooses the shutter speed
automatically. This mode provides a wider depth of field and can be used to blur out
backgrounds.
12
R
09:29
AE
P-GPS
READY TO GO (GPS)
AF/MF
ISO
SHUTTER
EV
WB
200 0.3 Auto
F
5.61/200
CAPACITY
4KP3020:12 384G
SD TIME
4KP30
74%
70%
4.07V
4.07V
Color Waveform

dji ZENMUSE X7 Specifications

General

Brand	dji
Model	ZENMUSE X7
Category	Digital Camera
Language	English