14
©
2018 DJI All Rights Reserved.
ZENMUSE X7
User Manual
Video/Photo Settings Page
Tap the
CA
4KP3020:12 384G
D TIM
4KP30
on the camera page to set Video/Photo parameters.
Video Settings
1. FPS: Tap to get the pull-down menu. Dierent FPSs are available to choose from. Please refer
to “Specication” to see the details of the FPS.
2. SSD: Choose to enable or disable CINESSD. To enable the CINESSD, videos can be recorded
in CinemaDNG or ProRes formats. The format of CinemaDNG is chosen as an example. After
the format is selected, it will be displayed below, and you may choose the desired frame ratio
and resolution in the pull-down menu. When the CINESSD is enabled, normal mode and EI
mode are available. For a detailed explanation of EI mode, please refer to “EI Mode”.
3. SSD Looks: Normal and CineLike are available. When you choose to record in CinemaDNG
format, this column will be in grey, indicating that it cannot be changed and only RAW is
supported.
4. Clip Index: Set the name of the video for management.
5. SD: Videos in H.264 and H.265 formats will be stored on the MicroSD card. An MicroSD card
is a necessary storage device for the Zenmuse X7. Choose H.264 or H.265 before recording,
and then the frame ratio and the resolution in the pull-down menu.
6. SD/Liveview Look: Choose from Normal and D-Cinelike.
7. Style: Includes four video styles, Standard, Landscape, Soft, and Custom.
8. White Balance: Refer to “White Balance” for detailed information.
23.976 FPS
FPS
Normal Mode EI Mode
Color Mode
16:9 3840x2160 16:9 3840x2160
CinemaDNG H264
SSD
CDNG 422HQ 4444XQ
H265H264
SD
RAW
SSD Looks
Normal
Clip Index
+0 +0 +0
Normal
SD/Liveview Looks
MOV
MP4
Video Format
Enable Dewarp
Style
Normal
Format SSD Format SD
Auto
White Balance
NTSC
NTSC/PAL
Video