DLab D2012 plus - 1 Specifications; 2 Declaration of Conformity

USER MANUAL
4
 Vibrations are likely to damage the centrifuge, contact our service center if abnormality observed.
1. Specifications
Maximum speed
15000rpm, increment: 100rpm
Maximum RCF
15100×g, increment: 100×g
Maximum capacity
2ml×12
Timer
30 seconds -99 minutes-HOLD, continuous operation
Driving Motor
Brushless DC motor
Safety devices
Door interlock、over-speed detector、over-temperature detector、automatic
internal diagnosis
Power requirements
Single-phase, 110V-240V, 50Hz/60Hz, 3A
Dimensions（mm）
（L）255×（W）245×（H）140
Weight
6kgs
Additional features
Speed/RCF switch、Pulse operation、Processing display、Voice reminder
2. Declaration of Conformity
D2012:
Construction in accordance with the following safety standards:
EN 61010-1
Construction in accordance with the following EMC standards:
EN 61326-1/ FCC Part 15 Subpart B/ ICES 001
Associated EU guidelines:
EMC-guidelines: 2004/108/EC
Instrument guidelines: 2006/95/EC
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
D2012 plus:
Construction in accordance with the following safety standards:
EN 61010-1
EN 61010-2-10
Construction in accordance with the following EMC standards:
EN 61326-1/ FCC Part 15 Subpart B/ IECS 001