3
1. Safety Instructions
Warning!
Read the operating instructions carefully before use.
Ensure that only trained staff works with the instrument.
Risk of burn!
Caution when touch the housing parts and the hotplate which
can reach temperature of 340 ℃.
Pay attention to the residual heat after switching off.
Protective ground contact！
Make sure that socket must be grounded
contact) before use.
When working wear personal safety guards to avoid the risk from:
- Splashing and evaporation of liquids
- Release of toxic or combustible gases
Set up the instrument in a spacious are on a stable, clean, non-slip, dry and
fireproof surface. Do not operate the instrument in explosive atmospheres, with
hazardous substances or under water.
Gradually increase the speed, reduce the speed if:
- Stirring bar breaks away due to high speed
To Next Page
Loading...
