15
heat warning function. When the heating function is switched off and the heating
plate temperature is still above 50°C, “Hot” will flash to warn that there is a hazard
of burns from the hotplate. When the hotplate temperature drops to below 50°C,
the unit will automatically switch off. If users want to turn off the LCD immediately,
just pull out the plug directly. When the plug is pulled out, the residual heat warning
function cannot be run.
7. Stirring (LCD digital model)
The function “stirring” is switched on or off via rotating stirring knob. The speed is
set on the knob (100 to 1500 rpm in steps of 10 rpm). When both of function heating
and stirring are switched on and those above operations are done, the LCD will
shift to the speed value and come back to the temperature value in about 5 seconds.
8. Remote Control (LCD digital model)
Figure 7
To Next Page
Loading...
