5
device and can not come off by themselves. Always disconnect the plug before
fitting accessories.
When the external temperature sensor needed, the tip of the measuring sensor
must be at least 5-10 mm from vessel bottom and wall.
The instrument can only be disconnected from the main power supply by pulling
out the main or the connector plug.
The voltage stated on the label must correspond to the main power supply.
Ensure that the main power supply cable does not touch the hotplate. Do not
cover the device.
The instrument may only be opened by experts.
Keep away from high magnetic field.
Do not use this instrument in an explosive environment; This instrument has no
explosion-proof function.
To Next Page
Loading...
