Safety
Page 43
8. SAFETY
8.1 INFORMATION
8.1.1 Protective Grounding (Earthing)
This unit consists of an exposed metal chassis that is connected directly to ground
(earth) via a power cord. The symbol used to indicate a protective grounding conductor
terminal in the equipment is shown in this section under "symbols".
8.1.2 Before Operating the Unit
q Inspect the equipment for any signs of damage, and read this manual thoroughly.
q Become familiar with all safety symbols and instructions in this manual to ensure
that the equipment is used and maintained safely.
WARNING: To avoid risk of injury or death, ALWAYS observe the following
precautions before operating the unit:
q Use only a power supply cord with a protective grounding terminal.
q Connect the power supply cord only to a power outlet equipped with with a
protective earth contact. Never connect to an extension cord that is not equipped
with this feature.
q Do not willfully interrupt the protective earth connection.
8.1.3 Supply Power Requirements
The unit can operate from any single phase AC power source that supplies between
100V and 240V (±10%) at a frequency range of 50 Hz to 60 Hz. For more information,
see the specifications section of this manual.
WARNING: To avoid electrical shock, do not operate the equipment if it shows any
sign of damage to any portion of its exterior surface, such as the outer casting or panels.
To Next Page
Loading...