Introduction
Page 1
1. INTRODUCTION
1.1 About this Manual
The DLS 50 Operating Manual can be used to learn about the unit for the first time, or
can be used as a look up reference book. We suggest that you carefully read the
introduction sections of this manual before powering on your unit. Failure to do so
could damage your DLS 50.
If you still have questions after reading this manual, please contact your DLS TestWorks
sales representative or our customer service department at the location shown in section
5, "Warranty" of this manual. If you have any suggestions as to how this manual could
be improved, please write to us at the same address.
Thank you for your business and for choosing DLS TestWorks.
1.2 Receiving and Unpacking the Unit
The DLS 50 has been shipped to you in a reinforced cardboard shipping container. We
recommend that you retain this carton for any future shipments.
Please check that you have received all the items as per the packing list and report any
discrepancies as soon as possible. Please also note that some options are installed within
the chassis of the main unit and can only be checked by powering on the unit.
The DLS 50 supports many AC voltages found in various parts of the world. We have
already selected the voltage appropriate to your country according to the information we
had. But errors do occur... so read section 3.1 "Powering on the DLS 50" before
switching on the DLS 50.
To Next Page
Loading...
General