Safety
Page 45
8.2.1 Before Operating the Unit
q Inspect the equipment for any signs of damage, and read the Operating and
Reference Manual thoroughly.
q Install the equipment as specified in the relevant section of this manual.
q Ensure that the equipment and any devices or cords connected to it are properly
grounded.
8.2.2 Operating the Unit
q Do not operate the equipment when its covers or panels have been removed.
q Do not interrupt the protective grounding connection. Any such action can lead to a
potential shock hazard that could result in serious personal injury.
q Do not operate equipment if an interruption to the protective grounding is
suspected. Ensure that the instrument remains inoperative.
q Use only the type of fuse specified.
q Do not use repaired fuses and avoid any situation that could short circuit the fuse
q Unless absolutely necessary, do not attempt to adjust or perform any maintenance or
repair procedure when the equipment is opened and connected to a power source at the
same time. Any such procedure should only be performed by qualified service
professional.
q Do not attempt any adjustment, maintenance or repair procedure to the equipment if
first aid is not accessible.
q Disconnect the power supply cord from the equipment before adding or removing
any components.
q Operating the equipment in the presence of flammable gases or fumes is extremely
hazardous.
q Do not perform any operating or maintenance procedure that is not described in the
Operating and Reference Manual or the Sevice Manual.
q Some of the equipment's capacitors may be charged even when the equipment is not
connected the power source.
To Next Page
Loading...